Electronic Mechanic Mock Test Sem 1
Electronic Mechanic Sem 1 : Active and Passive Components
ITI Electronic Mechanic Mock Test
Active and Passive Components
1 / 37
Category: Electronic Mechanic Sem 1: Active and Passive Components
Which part of the relay causes most trouble?
2 / 37
Which factor determines the inductance value?
3 / 37
At which condition the cold resistance of the low voltage lamp is measured using ohmmeter?
4 / 37
What is the value of carbon composition resistor?
5 / 37
What is the purpose of trimmer capacitor?
6 / 37
How much is the impedance of the circuit?
7 / 37
What is the name of effect of changing current in one coil, induces EMF in nearby coil?
8 / 37
Find the total inductance value of two inductors 10H and 15H of connected in series.
9 / 37
Which meter is used to find the exact resistance value of resistors?
10 / 37
Which property of the capacitor stores electrical energy in electrostatic field?
11 / 37
How power rating is specified for transformers?
12 / 37
What is the main problem caused for severe pitting in relays?
13 / 37
How many ohms is equal to one Mega ohm?
14 / 37
Find the current (I3) using Kirchhoff s current law?
15 / 37
Why the transformer core is made as thin laminations?
16 / 37
What type of ripple filter circuit is used for large load current requirements?
17 / 37
What is the colour code for 100ohm resistor?
18 / 37
Determine the current flows through 2k ohm resistor (R2).
19 / 37
Which component opposes any change in current?
20 / 37
What is the purpose of vacuum contactors in electrical panel?
21 / 37
Find the total resistance value of 10 ohms and 20 ohms connected in parallel.
22 / 37
Which value is equal to one picofarad?
23 / 37
What is the name of the triangle used in resistor, inductor in AC circuit?
24 / 37
What is the voltage (V2) drop across the resistor R2?
25 / 37
What is the name of Multi-turn potentiometers?
26 / 37
What is the reason for the use of contactors in control circuits?
27 / 37
What is the cause of burnt relay contacts?
28 / 37
What is the type of transformer?
29 / 37
What is the unit of inductance?
30 / 37
What is the phase relationship between the applied voltage and current in the primary of a transformer with open secondary winding?
31 / 37
What is the purpose of the electronic component used in radio receiver?
32 / 37
What is the effect on the transformer operated below the rated voltage?
33 / 37
What is the result of hysteresis loss in magnetic material?
34 / 37
What is the power dissipated if 10mA current flows through a 10K ohm resistor?
35 / 37
What is the name of the type of resistor?
36 / 37
Which unit is used to measure capacitance value?
37 / 37
What is the name of the coil?
Your score is
The average score is 0%
Restart quiz